
Step 1: Open the Helium application and login, then press + Add a Hotspot. Step 2: Next click Set up Hotspot, from here you will want to select Nebra Indoor Hotspot. Step 3: Place your hotspot in appropriate location, please reffer Ideal Hotspot Placement

Step 4: Accept diagnostics permission , This will allow Nebra Ltd to identify issues with your Hotspot in a secure way Step 5: Power Up the Nebra hotspot, and please note that never power on the Indoor/Outdoor hotspot without it's antenna connected as this may damage the unit. Step 6: Turn on mobile phone bluetooth and Push the button on the back of the unit once to enable pairing

Step 7: Select your hotspot in the app, you can check it is the correct one by matching the last 6 characters shown in the application with the last 6 characters of the mac address printed on the sticker on the bottom of the hotspot. Step 8: The app will show the available Wi-Fi networks within range of your Hotspot. Step 9: Once you provide the WiFi details, it will take few minutes to complete the connection Step 10: Next you need to submit antenna height and power details.

Step 10: Next you need to submit antenna height and power details. Step 11: Provide location permission: The helium application use phone location to assert location to the device. Step 12: Finally, you can confirm the location of your hotspot. Click continue and you should be presented with a map to then place where your hotspot is on the app. This requires $10 and it's alredy paid by Nebra LTD. Step 13: The setup should now be complete, it'll submit the details of the Hotspot to the Helium network and then in approximately 15 minutes confirm it's added to the network.